TI C674x DSP C6000 FreeRTOS porting

Hello,

We are looking into porting freeRTOS to the TI (Texas Instruments) C674x DSP C6000 (DSP on the OMAP-137). Does anyone have any information about a freeRTOS port that has been ported to this DSP? On the TI forum I saw that someone had done a port several years ago on a C674x DSP C6000 and posted it on this site.

Is there a way to find that port on this site even if it was done several years ago or has successfully done a FreeRTOS port on a TI DSP like on the OMAP-137 platform? see screenshot below. Thank you.

Hello, As follow up – Can FreeRTOS be ported and can it be run on the something like the DSP (C67x) of the OMAP137? Or is there a limitation on this type of DSP that would not allow another rtos like freeRTOS to run successfully on the DSP the way TI-RTOS did? Thank you again.

I am trying to find out if that is possible or not.

Given that someone was able to do it years before, I’d say that it should be possible. I do not have a first hand experience though.

Thank you Gaurav, let me know what you find out.

Unfortulately we cannot access that artifact. However, reading these docs from TI, it seems that they have a FreeRTOS port for C66x, C7x CPUs. I’d recommend reaching out to TI to get this PDK.