After two hours trial and error I still can’t get it to work. Other projects can be flashed normally but not the demo of FreeRTOS.
I got the following informations from J-Link driver:
* No device selected
The output of IAR says:
692 Bytes downloaded and verified
Then it is stalled until removing the USB-connection to the J-Link.
After that I get:
Fatal error: Could not transfer JTAG data
Warning: Code still contains old breakpoints
Well as for the breakpoints: IAR Workbench doesn’t not show me a single one. It’s just the one I have seen in the J-Link info.
I even tried another flasher-file (from the other projects) without success.
Help, hints or something to solve this problem would be fine…