Hi After updating to 4.11.1, im facing a few problems. my ___stack_chk_fail function gets called as xTraceEventCreate1 is returned. in trcTaskMonitor.c, there is an assumption that standard stdio.h can always used. It looks like it is prepared that TRC_CFG_PRINTF should be a standard configuratio…

Hi Martin, It looks like you’re simply running out of stack space. If you investigate the HardFault, you will probably find a value in BFAR that’s just outside of a stack. When a SysTick IRQ happens, which stack is used? Are you sure that you tried to increase this stack? Best regards, Boudewijn …

Problems after updating to traceviewer 4.11.1

Partners & Sponsors Percepio

MartinB (Martin Belohorka) January 25, 2026, 10:23am 3

I have basically done no change since my unorthodox integration of version 4.10.3 that you might remember from this thread

since it was so unorthodox, I removed that integration completely and installed a new one.

// Martin

Topic		Replies	Views
FreeRTOS stack corruption on STM32F4 with gcc Kernel	11	1221	February 25, 2013
Stack check problem on STM32F4 Kernel	5	214	March 11, 2013
Sporadic hard faults, how to find reason Kernel	26	646	February 2, 2016
Trouble using FreeRTOS+Trace Kernel	6	631	September 11, 2014
Stack overflow when only Idle task running Kernel	3	289	May 4, 2012

Problems after updating to traceviewer 4.11.1

Related topics