ashutosh32 wrote on Tuesday, January 27, 2015:
Hi,
I have copied the demo project for PIC18F (FreeRTOSV8.2.0) and ported to PIC18F6722. It is working fine. When we added more modules into the project, I got an error message :
MPLINK 4.48, Linker
Device Database Version 1.13
Copyright © 1998-2011 Microchip Technology Inc.
Errors : 0
MP2HEX 4.48, COFF to HEX File Converter
Copyright © 1998-2011 Microchip Technology Inc.
Error - Selected hex format does not support byte addresses above 64kb; use INHX32 format!
Errors : 1
But when I changed the hex format from INHX8N to INHX32, it stop working.
Please suggest me what to do.
I am attaching my linker script :
LIBPATH .
FILES c018i.o
FILES clib.lib
FILES p18f6722.lib
CODEPAGE NAME=vectors START=0x0 END=0x39 PROTECTED
CODEPAGE NAME=page START=0x3A END=0x1FFFF
CODEPAGE NAME=idlocs START=0x200000 END=0x200007 PROTECTED
CODEPAGE NAME=config START=0x300000 END=0x30000D PROTECTED
CODEPAGE NAME=devid START=0x3FFFFE END=0x3FFFFF PROTECTED
CODEPAGE NAME=eedata START=0xF00000 END=0xF003FF PROTECTED
ACCESSBANK NAME=accessram START=0x0 END=0x5F
DATABANK NAME=gpr0 START=0x60 END=0xFF
DATABANK NAME=gpr1 START=0x100 END=0x1FF
DATABANK NAME=gpr2 START=0x200 END=0x2FF
DATABANK NAME=gpr3 START=0x300 END=0x3FF
DATABANK NAME=gpr4 START=0x400 END=0x4FF
DATABANK NAME=gpr5 START=0x500 END=0x5FF
DATABANK NAME=gpr6 START=0x600 END=0x6FF
DATABANK NAME=gpr7 START=0x700 END=0x7FF
DATABANK NAME=BIG_BLOCK START=0x800 END=0xDFF
DATABANK NAME=gpr8 START=0xE00 END=0xEFF
DATABANK NAME=gpr9 START=0xF00 END=0xF5F
ACCESSBANK NAME=accesssfr START=0xF60 END=0xFFF PROTECTED
SECTION NAME=CONFIG ROM=config
STACK SIZE=0x60 RAM=BIG_BLOCK
Thanks,
Ashutosh