/* * FreeRTOS Kernel V10.4.3 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a copy of * this software and associated documentation files (the "Software"), to deal in * the Software without restriction, including without limitation the rights to * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of * the Software, and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * https://www.FreeRTOS.org * https://github.com/FreeRTOS * */ /*----------------------------------------------------------- * Implementation of functions defined in portable.h for the ARM CM0 port. *----------------------------------------------------------*/ /* Scheduler includes. */ #include "FreeRTOS.h" #include "task.h" // #include "hardware/divider.h" /* Constants required to manipulate the NVIC. */ #define portNVIC_SYSTICK_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000e010 ) ) #define portNVIC_SYSTICK_LOAD_REG ( *( ( volatile uint32_t * ) 0xe000e014 ) ) #define portNVIC_SYSTICK_CURRENT_VALUE_REG ( *( ( volatile uint32_t * ) 0xe000e018 ) ) #define portNVIC_INT_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000ed04 ) ) #define portNVIC_SHPR3_REG ( *( ( volatile uint32_t * ) 0xe000ed20 ) ) #define portNVIC_SYSTICK_CLK_BIT ( 1UL << 2UL ) #define portNVIC_SYSTICK_INT_BIT ( 1UL << 1UL ) #define portNVIC_SYSTICK_ENABLE_BIT ( 1UL << 0UL ) #define portNVIC_SYSTICK_COUNT_FLAG_BIT ( 1UL << 16UL ) #define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) #define portMIN_INTERRUPT_PRIORITY ( 255UL ) #define portNVIC_PENDSV_PRI ( portMIN_INTERRUPT_PRIORITY << 16UL ) #define portNVIC_SYSTICK_PRI ( portMIN_INTERRUPT_PRIORITY << 24UL ) /* Constants required to set up the initial stack. */ #define portINITIAL_XPSR ( 0x01000000 ) /* The systick is a 24-bit counter. */ #define portMAX_24_BIT_NUMBER ( 0xffffffUL ) /* A fiddle factor to estimate the number of SysTick counts that would have * occurred while the SysTick counter is stopped during tickless idle * calculations. */ #ifndef portMISSED_COUNTS_FACTOR #define portMISSED_COUNTS_FACTOR ( 45UL ) #endif /* Let the user override the pre-loading of the initial LR with the address of * prvTaskExitError() in case it messes up unwinding of the stack in the * debugger. */ #ifdef configTASK_RETURN_ADDRESS #define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS #else #define portTASK_RETURN_ADDRESS prvTaskExitError #endif /* * Setup the timer to generate the tick interrupts. The implementation in this * file is weak to allow application writers to change the timer used to * generate the tick interrupt. */ void vPortSetupTimerInterrupt( void ); /* * Exception handlers. */ void xPortPendSVHandler( void ) __attribute__( ( naked ) ); void xPortSysTickHandler( void ); void vPortSVCHandler( void ); /* * Start first task is a separate function so it can be tested in isolation. */ static void vPortStartFirstTask( void ) __attribute__( ( naked ) ); /* * Used to catch tasks that attempt to return from their implementing function. */ static void prvTaskExitError( void ); /*-----------------------------------------------------------*/ /* Each task maintains its own interrupt status in the critical nesting * variable. */ static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; /*-----------------------------------------------------------*/ /* * The number of SysTick increments that make up one tick period. */ #if ( configUSE_TICKLESS_IDLE == 1 ) static uint32_t ulTimerCountsForOneTick = 0; #endif /* configUSE_TICKLESS_IDLE */ /* * The maximum number of tick periods that can be suppressed is limited by the * 24 bit resolution of the SysTick timer. */ #if ( configUSE_TICKLESS_IDLE == 1 ) static uint32_t xMaximumPossibleSuppressedTicks = 0; #endif /* configUSE_TICKLESS_IDLE */ /* * Compensate for the CPU cycles that pass while the SysTick is stopped (low * power functionality only. */ #if ( configUSE_TICKLESS_IDLE == 1 ) static uint32_t ulStoppedTimerCompensation = 0; #endif /* configUSE_TICKLESS_IDLE */ /*-----------------------------------------------------------*/ /* * See header file for description. */ StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack, TaskFunction_t pxCode, void * pvParameters ) { /* Simulate the stack frame as it would be created by a context switch * interrupt. */ pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */ *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ pxTopOfStack--; *pxTopOfStack = ( StackType_t ) pxCode; /* PC */ pxTopOfStack--; *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */ pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ pxTopOfStack -= 8; /* R11..R4. */ pxTopOfStack -= 4; /* Divider state */ return pxTopOfStack; } /*-----------------------------------------------------------*/ static void prvTaskExitError( void ) { volatile uint32_t ulDummy = 0UL; /* A function that implements a task must not exit or attempt to return to * its caller as there is nothing to return to. If a task wants to exit it * should instead call vTaskDelete( NULL ). * * Artificially force an assert() to be triggered if configASSERT() is * defined, then stop here so application writers can catch the error. */ configASSERT( uxCriticalNesting == ~0UL ); portDISABLE_INTERRUPTS(); while( ulDummy == 0 ) { /* This file calls prvTaskExitError() after the scheduler has been * started to remove a compiler warning about the function being defined * but never called. ulDummy is used purely to quieten other warnings * about code appearing after this function is called - making ulDummy * volatile makes the compiler think the function could return and * therefore not output an 'unreachable code' warning for code that appears * after it. */ } } /*-----------------------------------------------------------*/ void vPortSVCHandler( void ) { /* This function is no longer used, but retained for backward * compatibility. */ } /*-----------------------------------------------------------*/ void vPortStartFirstTask( void ) { /* The MSP stack is not reset as, unlike on M3/4 parts, there is no vector * table offset register that can be used to locate the initial stack value. * Not all M0 parts have the application vector table at address 0. */ __asm volatile ( " .syntax unified \n" " ldr r2, pxCurrentTCBConst2 \n"/* Obtain location of pxCurrentTCB. */ " ldr r3, [r2] \n" " ldr r0, [r3] \n"/* The first item in pxCurrentTCB is the task top of stack. */ " adds r0, #32 \n"/* Discard everything up to r0. */ " msr psp, r0 \n"/* This is now the new top of stack to use in the task. */ " movs r0, #2 \n"/* Switch to the psp stack. */ " msr CONTROL, r0 \n" " isb \n" " pop {r0-r5} \n"/* Pop the registers that are saved automatically. */ " mov lr, r5 \n"/* lr is now in r5. */ " pop {r3} \n"/* Return address is now in r3. */ " pop {r2} \n"/* Pop and discard XPSR. */ " cpsie i \n"/* The first task has its context and interrupts can be enabled. */ " bx r3 \n"/* Finally, jump to the user defined task code. */ " \n" " .align 4 \n" "pxCurrentTCBConst2: .word pxCurrentTCB " ); } /*-----------------------------------------------------------*/ /* * See header file for description. */ BaseType_t xPortStartScheduler( void ) { /* Make PendSV, CallSV and SysTick the same priority as the kernel. */ portNVIC_SHPR3_REG |= portNVIC_PENDSV_PRI; portNVIC_SHPR3_REG |= portNVIC_SYSTICK_PRI; /* Start the timer that generates the tick ISR. Interrupts are disabled * here already. */ vPortSetupTimerInterrupt(); /* Initialise the critical nesting count ready for the first task. */ uxCriticalNesting = 0; /* Start the first task. */ vPortStartFirstTask(); /* Should never get here as the tasks will now be executing! Call the task * exit error function to prevent compiler warnings about a static function * not being called in the case that the application writer overrides this * functionality by defining configTASK_RETURN_ADDRESS. Call * vTaskSwitchContext() so link time optimisation does not remove the * symbol. */ vTaskSwitchContext(); prvTaskExitError(); /* Should not get here! */ return 0; } /*-----------------------------------------------------------*/ void vPortEndScheduler( void ) { /* Not implemented in ports where there is nothing to return to. * Artificially force an assert. */ configASSERT( uxCriticalNesting == 1000UL ); } /*-----------------------------------------------------------*/ void vPortYield( void ) { /* Set a PendSV to request a context switch. */ portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; /* Barriers are normally not required but do ensure the code is completely * within the specified behaviour for the architecture. */ __asm volatile ( "dsb" ::: "memory" ); __asm volatile ( "isb" ); } /*-----------------------------------------------------------*/ void vPortEnterCritical( void ) { portDISABLE_INTERRUPTS(); uxCriticalNesting++; __asm volatile ( "dsb" ::: "memory" ); __asm volatile ( "isb" ); } /*-----------------------------------------------------------*/ void vPortExitCritical( void ) { configASSERT( uxCriticalNesting ); uxCriticalNesting--; if( uxCriticalNesting == 0 ) { portENABLE_INTERRUPTS(); } } /*-----------------------------------------------------------*/ uint32_t ulSetInterruptMaskFromISR( void ) { __asm volatile ( " mrs r0, PRIMASK \n" " cpsid i \n" " bx lr " ::: "memory" ); } /*-----------------------------------------------------------*/ void vClearInterruptMaskFromISR( __attribute__( ( unused ) ) uint32_t ulMask ) { __asm volatile ( " msr PRIMASK, r0 \n" " bx lr " ::: "memory" ); } /*-----------------------------------------------------------*/ void xPortPendSVHandler( void ) { /* This is a naked function. */ // Save area: //psp-> | 0 // | -4 r11 // | -8 r10 // | -12 r9 //pxTopOfStack + 32 | -16 r8 // | -20 r7 // | -24 r6 // | -28 r5 //psp - 32 | -32 r4 // | -36 SIO_DIV_QUOTIENT // | -40 SIO_DIV_REMAINDER // | -44 SIO_DIV_UDIVISOR //pxTopOfStack-> | -48 SIO_DIV_UDIVIDEND __asm volatile ( " .syntax unified \n" " mrs r0, psp \n" " \n" " ldr r3, pxCurrentTCBConst \n"/* Get the location of the current TCB. */ " ldr r2, [r3] \n" " \n" " subs r0, r0, #32 \n"/* Make space for the remaining low registers. */ " stm r0!, {r4-r7} \n"/* Store the low registers that are not saved automatically. */ " mov r4, r8 \n"/* Store the high registers. */ " mov r5, r9 \n" " mov r6, r10 \n" " mov r7, r11 \n" " stm r0!, {r4-r7} \n" " \n" " subs r0, r0, #48 \n"/* Make space for divider state. */ " str r0, [r2] \n"/* Save the new top of stack. */ " \n" " ldr r2, =SIO_BASE \n"/* hw_divider_save_state */ " ldr r1, [r2, #0x00000078] \n"/* SIO_DIV_CSR_OFFSET (sio.h) */ /* wait for results as we can't save signed-ness of operation */ "MY1: \n" " lsrs r1, 1 \n"/* #SIO_DIV_CSR_READY_SHIFT_FOR_CARRY */ " bcc MY1 \n" " ldr r4, [r2, #0x00000060] \n"/* SIO_DIV_UDIVIDEND_OFFSET */ " ldr r5, [r2, #0x00000064] \n"/* SIO_DIV_UDIVISOR_OFFSET */ " ldr r6, [r2, #0x00000074] \n"/* SIO_DIV_REMAINDER_OFFSET */ " ldr r7, [r2, #0x00000070] \n"/* SIO_DIV_QUOTIENT_OFFSET */ " stm r0!, {r4-r7} \n"/* Save HW divider state */ " \n" " push {r3, r14} \n" " cpsid i \n" " bl vTaskSwitchContext \n" " cpsie i \n" " pop {r2, r3} \n"/* lr goes in r3. r2 now holds tcb pointer. */ " \n" " ldr r1, [r2] \n" " ldr r0, [r1] \n"/* The first item in pxCurrentTCB is the task top of stack. */ " \n" " ldr r2, =SIO_BASE \n"/* hw_divider_restore_state */ " ldm r0!, {r4-r7} \n" " str r4, [r2, #0x00000060] \n"/* SIO_DIV_UDIVIDEND_OFFSET */ " str r5, [r2, #0x00000064] \n"/* SIO_DIV_UDIVISOR_OFFSET */ " str r6, [r2, #0x00000074] \n"/* SIO_DIV_REMAINDER_OFFSET */ " str r7, [r2, #0x00000070] \n"/* SIO_DIV_QUOTIENT_OFFSET */ " \n" " adds r0, r0, #16 \n"/* Move to the high registers. */ " ldm r0!, {r4-r7} \n"/* Pop the high registers. */ " mov r8, r4 \n" " mov r9, r5 \n" " mov r10, r6 \n" " mov r11, r7 \n" " \n" " msr psp, r0 \n"/* Remember the new top of stack for the task. */ " \n" " subs r0, r0, #32 \n"/* Go back for the low registers that are not automatically restored. */ " ldm r0!, {r4-r7} \n"/* Pop low registers. */ " \n" " bx r3 \n" " \n" " .align 4 \n" "pxCurrentTCBConst: .word pxCurrentTCB \n" "SIO_BASE: .word SIO_BASE" ); } /*-----------------------------------------------------------*/ void xPortSysTickHandler( void ) { uint32_t ulPreviousMask; ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR(); { /* Increment the RTOS tick. */ if( xTaskIncrementTick() != pdFALSE ) { /* Pend a context switch. */ portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; } } portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask ); } /*-----------------------------------------------------------*/ /* * Setup the systick timer to generate the tick interrupts at the required * frequency. */ __attribute__( ( weak ) ) void vPortSetupTimerInterrupt( void ) { /* Calculate the constants required to configure the tick interrupt. */ #if ( configUSE_TICKLESS_IDLE == 1 ) { ulTimerCountsForOneTick = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ); xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick; ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR; } #endif /* configUSE_TICKLESS_IDLE */ /* Stop and reset the SysTick. */ portNVIC_SYSTICK_CTRL_REG = 0UL; portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; /* Configure SysTick to interrupt at the requested rate. */ portNVIC_SYSTICK_LOAD_REG = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT; } /*-----------------------------------------------------------*/ #if ( configUSE_TICKLESS_IDLE == 1 ) __attribute__( ( weak ) ) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ) { uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements; TickType_t xModifiableIdleTime; /* Make sure the SysTick reload value does not overflow the counter. */ if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks ) { xExpectedIdleTime = xMaximumPossibleSuppressedTicks; } /* Stop the SysTick momentarily. The time the SysTick is stopped for * is accounted for as best it can be, but using the tickless mode will * inevitably result in some tiny drift of the time maintained by the * kernel with respect to calendar time. */ portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT; /* Calculate the reload value required to wait xExpectedIdleTime * tick periods. -1 is used because this code will execute part way * through one of the tick periods. */ ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) ); if( ulReloadValue > ulStoppedTimerCompensation ) { ulReloadValue -= ulStoppedTimerCompensation; } /* Enter a critical section but don't use the taskENTER_CRITICAL() * method as that will mask interrupts that should exit sleep mode. */ __asm volatile ( "cpsid i" ::: "memory" ); __asm volatile ( "dsb" ); __asm volatile ( "isb" ); /* If a context switch is pending or a task is waiting for the scheduler * to be unsuspended then abandon the low power entry. */ if( eTaskConfirmSleepModeStatus() == eAbortSleep ) { /* Restart from whatever is left in the count register to complete * this tick period. */ portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG; /* Restart SysTick. */ portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; /* Reset the reload register to the value required for normal tick * periods. */ portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; /* Re-enable interrupts - see comments above the cpsid instruction() * above. */ __asm volatile ( "cpsie i" ::: "memory" ); } else { /* Set the new reload value. */ portNVIC_SYSTICK_LOAD_REG = ulReloadValue; /* Clear the SysTick count flag and set the count value back to * zero. */ portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; /* Restart SysTick. */ portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can * set its parameter to 0 to indicate that its implementation contains * its own wait for interrupt or wait for event instruction, and so wfi * should not be executed again. However, the original expected idle * time variable must remain unmodified, so a copy is taken. */ xModifiableIdleTime = xExpectedIdleTime; configPRE_SLEEP_PROCESSING( xModifiableIdleTime ); if( xModifiableIdleTime > 0 ) { __asm volatile ( "dsb" ::: "memory" ); __asm volatile ( "wfi" ); __asm volatile ( "isb" ); } configPOST_SLEEP_PROCESSING( xExpectedIdleTime ); /* Re-enable interrupts to allow the interrupt that brought the MCU * out of sleep mode to execute immediately. see comments above * __disable_interrupt() call above. */ __asm volatile ( "cpsie i" ::: "memory" ); __asm volatile ( "dsb" ); __asm volatile ( "isb" ); /* Disable interrupts again because the clock is about to be stopped * and interrupts that execute while the clock is stopped will increase * any slippage between the time maintained by the RTOS and calendar * time. */ __asm volatile ( "cpsid i" ::: "memory" ); __asm volatile ( "dsb" ); __asm volatile ( "isb" ); /* Disable the SysTick clock without reading the * portNVIC_SYSTICK_CTRL_REG register to ensure the * portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set. Again, * the time the SysTick is stopped for is accounted for as best it can * be, but using the tickless mode will inevitably result in some tiny * drift of the time maintained by the kernel with respect to calendar * time*/ portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT ); /* Determine if the SysTick clock has already counted to zero and * been set back to the current reload value (the reload back being * correct for the entire expected idle time) or if the SysTick is yet * to count to zero (in which case an interrupt other than the SysTick * must have brought the system out of sleep mode). */ if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 ) { uint32_t ulCalculatedLoadValue; /* The tick interrupt is already pending, and the SysTick count * reloaded with ulReloadValue. Reset the * portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick * period. */ ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG ); /* Don't allow a tiny value, or values that have somehow * underflowed because the post sleep hook did something * that took too long. */ if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) ) { ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ); } portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue; /* As the pending tick will be processed as soon as this * function exits, the tick value maintained by the tick is stepped * forward by one less than the time spent waiting. */ ulCompleteTickPeriods = xExpectedIdleTime - 1UL; } else { /* Something other than the tick interrupt ended the sleep. * Work out how long the sleep lasted rounded to complete tick * periods (not the ulReload value which accounted for part * ticks). */ ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG; /* How many complete tick periods passed while the processor * was waiting? */ ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick; /* The reload value is set to whatever fraction of a single tick * period remains. */ portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements; } /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG * again, then set portNVIC_SYSTICK_LOAD_REG back to its standard * value. */ portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; vTaskStepTick( ulCompleteTickPeriods ); portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; /* Exit with interrpts enabled. */ __asm volatile ( "cpsie i" ::: "memory" ); } } #endif /* configUSE_TICKLESS_IDLE */