# what about Demo/uIP\_Demo\_Rowley\_ARM7 ?

**URL:** <https://forums.freertos.org/t/what-about-demo-uip-demo-rowley-arm7/5401>\
**Category:** Kernel\
**Created:** [April 20, 2006, 3:41pm UTC](https://forums.freertos.org/t/what-about-demo-uip-demo-rowley-arm7/5401 "2006-04-20T15:41:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 20, 2006, 3:41pm UTC](https://forums.freertos.org/t/what-about-demo-uip-demo-rowley-arm7/5401/1 "2006-04-20T15:41:22Z")

</div>

**[rainer32](https://sourceforge.net/u/rainer32/)** wrote on [Thursday, April 20, 2006](https://sourceforge.net/p/freertos/discussion/382005/thread/ef437286/#da7f):

Hi all,

There’s a Demo/uIP\_Demo\_Rowley\_ARM7 directory in the FreeRTOS source tree. It isn’t mentioned on the FreeRTOS web site, which only speaks about the iar version.  
The thing is: i’d like to port this demo to plain gcc+make, and it’s far easier to start from a Rowley project than from an IAR project. But i’m not even sure that the Demo/uIP\_Demo\_Rowley\_ARM7 is (still) a current and maintained version of this demo, as opposed to the iar version that is explicitely mentioned on the web page. Since I don’t have any Rowley stuff, I can’t try.  
So the question is: is this directory a current and working version of this demo for rowley?

Best Regards,  
Rainer

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 20, 2006, 6:36pm UTC](https://forums.freertos.org/t/what-about-demo-uip-demo-rowley-arm7/5401/2 "2006-04-20T18:36:13Z")

</div>

**nobody** wrote on [Thursday, April 20, 2006](https://sourceforge.net/p/freertos/discussion/382005/thread/ef437286/#da7f/c0a5):

I think this is it:  
[http://www.freertos.org/portrowleylpc2124.html](http://www.freertos.org/portrowleylpc2124.html)

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 20, 2006, 9:22pm UTC](https://forums.freertos.org/t/what-about-demo-uip-demo-rowley-arm7/5401/3 "2006-04-20T21:22:05Z")

</div>

**[rainer32](https://sourceforge.net/u/rainer32/)** wrote on [Thursday, April 20, 2006](https://sourceforge.net/p/freertos/discussion/382005/thread/ef437286/#da7f/c0a5/8591):

so if i understand right, the iar and rowley demos for uip are for two completely different boards:  
the iar for at91sam7x-ek (which is what i need) and the rowley for some lpc2124-based board (which i don’t have).

Thus, i guess that in this case, i’ll start from the iar port and look if it’s (easily) portable to sam7xc.