# Update of Xilinx PowerPC (PPC405) Port

**URL:** <https://forums.freertos.org/t/update-of-xilinx-powerpc-ppc405-port/3201>\
**Category:** Kernel\
**Created:** [April 6, 2012, 11:05am UTC](https://forums.freertos.org/t/update-of-xilinx-powerpc-ppc405-port/3201 "2012-04-06T11:05:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 6, 2012, 11:05am UTC](https://forums.freertos.org/t/update-of-xilinx-powerpc-ppc405-port/3201/1 "2012-04-06T11:05:21Z")

</div>

**[chuanhong](https://sourceforge.net/u/chuanhong/)** wrote on [Friday, April 06, 2012](https://sourceforge.net/p/freertos/discussion/382005/thread/9093b6f3/#696c):

Hi

The demo “Xilinx PowerPC (PPC405) Port” uses functions in&nbsp; “Xilinx Board Support Package” (BSP) as part of its portable ports.  
However, some functions are not referenced in the BSP, resulting in the failure in linking.  
e.g. XIntc\_mGetIntrStatus (seems to be interrupt funciton in BSP)  
I guess, the BSP is updated therefore not compitable with the FreeRTOS now  
So, which EDK version is FreeRTOS using in this demo?  
Any solutions?

Thanks in advance  
Sean

---

<div class="post-metadata">

**Author:** ![rtel](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/rtel/32/31_2.png) [@rtel](https://forums.freertos.org/u/rtel)\
**Post date:** [April 7, 2012, 1:36pm UTC](https://forums.freertos.org/t/update-of-xilinx-powerpc-ppc405-port/3201/2 "2012-04-07T13:36:04Z")

</div>

**[rtel](https://sourceforge.net/u/rtel/)** wrote on [Saturday, April 07, 2012](https://sourceforge.net/p/freertos/discussion/382005/thread/9093b6f3/#6dde):

I can’t remember, but I think it was version 6 or 9, not that that helps you much.&nbsp; Both Xilinx PowerPC ports are not going to be updated again, as Xilinx are not updating their PPC products.&nbsp; The Xilinx MicroBlaze port and demo have both recently been updated to the latest (13?) ISE version, and there is a new Xilinx Zynq port as these are the two Xilinx lines being actively developed.

Regards.
