# TMS570 Demo Application **URL:** \ **Category:** Texas Instruments\ **Created:** [December 18, 2019, 10:40pm UTC](https://forums.freertos.org/t/tms570-demo-application/8460 "2019-12-18T22:40:43Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![farbod1277](https://avatars.discourse-cdn.com/v4/letter/f/2bfe46/32.png) [@farbod1277](https://forums.freertos.org/u/farbod1277)\ **Post date:** [December 18, 2019, 10:40pm UTC](https://forums.freertos.org/t/tms570-demo-application/8460/1 "2019-12-18T22:40:43Z")
Hi, I have a TMDX570LC43HDK development kit ([http://www.ti.com/tool/TMDX570LC43HDK](http://www.ti.com/tool/TMDX570LC43HDK)) and was wondering if the FreeRTOS port provided in the TMS570 Demo ([https://www.freertos.org/Free\_RTOS\_for\_TI\_RM48\_and\_TMS570.html](https://www.freertos.org/Free_RTOS_for_TI_RM48_and_TMS570.html)) targeted at TMDX570LS31USB would work with this MCU or not. If not, could you please let me know how I could go about creating a new port for this board? Thanks, Farbod ---
**Author:** ![rtel](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/rtel/32/31_2.png) [@rtel](https://forums.freertos.org/u/rtel)\ **Post date:** [December 18, 2019, 11:22pm UTC](https://forums.freertos.org/t/tms570-demo-application/8460/2 "2019-12-18T23:22:21Z")
Without diving deep into the MCU versions used by both parts to determine if there are any differences - from a high level I would say as both are TMS570 parts in the same family you should be good to use the existing FreeRTOS demo as a base. The following link might then be helpful: [https://www.freertos.org/porting-a-freertos-demo-to-different-hardware.html](https://www.freertos.org/porting-a-freertos-demo-to-different-hardware.html) Note also that the last time I looked TI’s HalCoGen tool would create FreeRTOS projects for you - so that might actually be you best route to getting up and running.