# STR750 (ST750-EVAL) + IAR 5 not working

**URL:** <https://forums.freertos.org/t/str750-st750-eval-iar-5-not-working/5414>\
**Category:** Kernel\
**Created:** [August 19, 2008, 9:35am UTC](https://forums.freertos.org/t/str750-st750-eval-iar-5-not-working/5414 "2008-08-19T09:35:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [August 19, 2008, 9:35am UTC](https://forums.freertos.org/t/str750-st750-eval-iar-5-not-working/5414/1 "2008-08-19T09:35:08Z")

</div>

**[leviathanx](https://sourceforge.net/u/leviathanx/)** wrote on [Tuesday, August 19, 2008](https://sourceforge.net/p/freertos/discussion/382005/thread/ecff3426/#0f7c):

Hello,

After two hours trial and error I still can’t get it to work. Other projects can be flashed normally but not the demo of FreeRTOS.

I got the following informations from J-Link driver:

Breakpoint&nbsp;&nbsp;&nbsp; #1  
Handle&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0x001  
Address&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0x00000008  
Permission&nbsp;&nbsp;&nbsp;&nbsp; Hard  
Implementation&nbsp;&nbsp;&nbsp;&nbsp; Hard

\* No device selected

The output of IAR says:

692 Bytes downloaded and verified  
Target reset

Then it is stalled until removing the USB-connection to the J-Link.  
After that I get:

Fatal error: Could not transfer JTAG data  
Session aborted  
Warning: Code still contains old breakpoints

\*\*\*\*\*  
Well as for the breakpoints: IAR Workbench doesn’t not show me a single one. It’s just the one I have seen in the J-Link info.  
I even tried another flasher-file (from the other projects) without success.

Help, hints or something to solve this problem would be fine…

Regards,
