# STM32F4 Eclipse and Linux **URL:** \ **Category:** Kernel\ **Created:** [January 6, 2013, 3:10am UTC](https://forums.freertos.org/t/stm32f4-eclipse-and-linux/5347 "2013-01-06T03:10:47Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\ **Post date:** [January 6, 2013, 3:10am UTC](https://forums.freertos.org/t/stm32f4-eclipse-and-linux/5347/1 "2013-01-06T03:10:47Z")
**[dave3891](https://sourceforge.net/u/dave3891/)** wrote on [Sunday, January 06, 2013](https://sourceforge.net/p/freertos/discussion/382005/thread/ec692c0c/#e0dd): Can someone give me some direction on setting up a basic freeRTOS project with Eclipse and Linux on a STM32F4Discovery board? I have the tool chain working with eclipse and a working stlink debugger and I can compile and load the discovery projects no problem. But I can not figure out how to make a freeRTOS project for this board. I cant seem to find a pre - made one that I could import into eclipse either as they all seem to be from a different IDE. Any help with what files I would need to include and what structure to put them in or a example project would be appreciated. Thanks Dave ---
**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\ **Post date:** [January 6, 2013, 5:10am UTC](https://forums.freertos.org/t/stm32f4-eclipse-and-linux/5347/2 "2013-01-06T05:10:43Z")
**[dave3891](https://sourceforge.net/u/dave3891/)** wrote on [Sunday, January 06, 2013](https://sourceforge.net/p/freertos/discussion/382005/thread/ec692c0c/#657b): Well I got it to compile and load on the board fine. All it took was a little bit of modifing (turning off functions) on the FreeRTOSConfig.h file. Dave