# porting demo using differetn board

**URL:** <https://forums.freertos.org/t/porting-demo-using-differetn-board/866>\
**Category:** Kernel\
**Created:** [March 13, 2012, 1:54pm UTC](https://forums.freertos.org/t/porting-demo-using-differetn-board/866 "2012-03-13T13:54:12Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [March 13, 2012, 1:54pm UTC](https://forums.freertos.org/t/porting-demo-using-differetn-board/866/1 "2012-03-13T13:54:12Z")

</div>

**[thomas84](https://sourceforge.net/u/thomas84/)** wrote on [Tuesday, March 13, 2012](https://sourceforge.net/p/freertos/discussion/382005/thread/27402f6f/#0b6a):

Hi,  
i just finished to make FreeRTOS run on the MCB1700board using LPCxpresso!  
I used the “NXP LPC1768 demo using GCC and Code Red” The LED’s work liek the modifying a demo site told me!  
So far, so good! But I don’t know how/what to change to make the LCD-Display run.  
The aim is to let the hole Demo including Webserver run on the Keil MCB7100 evaluation board.  
Can someone please give my some advice?

---

<div class="post-metadata">

**Author:** ![rtel](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/rtel/32/31_2.png) [@rtel](https://forums.freertos.org/u/rtel)\
**Post date:** [March 13, 2012, 2:58pm UTC](https://forums.freertos.org/t/porting-demo-using-differetn-board/866/2 "2012-03-13T14:58:50Z")

</div>

**[rtel](https://sourceforge.net/u/rtel/)** wrote on [Tuesday, March 13, 2012](https://sourceforge.net/p/freertos/discussion/382005/thread/27402f6f/#8f46):

Display drivers and interfaces can be very different.&nbsp; I would suggest using a demo that comes with the hardware, and uses the LCD display, as a reference and starting point for including the same functionality in your own application.

Regards.