# Port for IAR Development Kit STM32-SK

**URL:** <https://forums.freertos.org/t/port-for-iar-development-kit-stm32-sk/4126>\
**Category:** Kernel\
**Created:** [May 4, 2011, 2:34pm UTC](https://forums.freertos.org/t/port-for-iar-development-kit-stm32-sk/4126 "2011-05-04T14:34:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [May 4, 2011, 2:34pm UTC](https://forums.freertos.org/t/port-for-iar-development-kit-stm32-sk/4126/1 "2011-05-04T14:34:46Z")

</div>

**[spaark](https://sourceforge.net/u/spaark/)** wrote on [Wednesday, May 04, 2011](https://sourceforge.net/p/freertos/discussion/382005/thread/b5f90c68/#3692):

Hi

Is there a port for the STM32-SK Development Kit from IAR? I’m using this to evaluate a RTOS (e.g. Segger EmbOS, Micrium uC/OS-II, FreeRTOS/OpenRTOS) for our future projects.

Regards  
Spaark

---

<div class="post-metadata">

**Author:** ![rtel](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/rtel/32/31_2.png) [@rtel](https://forums.freertos.org/u/rtel)\
**Post date:** [May 5, 2011, 5:10pm UTC](https://forums.freertos.org/t/port-for-iar-development-kit-stm32-sk/4126/2 "2011-05-05T17:10:50Z")

</div>

**[rtel](https://sourceforge.net/u/rtel/)** wrote on [Thursday, May 05, 2011](https://sourceforge.net/p/freertos/discussion/382005/thread/b5f90c68/#68d1):

There is an STM32/IAR port, and several demos that target different kits.&nbsp; That particular kit is probably not one of them, but it would be easy to change an existing demo to run on that kit.&nbsp; You would have to change the target device in the project options to be correct for the part on that kit, and probably change a few IO definitions as the LEDs are bound to be on different port pins (LED IO is all encapsulated in a single and simple file).

Generally the effort would be minimal.&nbsp; If you supplied the hardware, I could even do it for you, for a very modest fee ;o)&nbsp; Alternatively, you could use FreeRTOS on a different board to evaluate it (in fact, it does not even have to be an STM32 board, just a Cortex-M3 board, as the cores are the same, and the use of FreeRTOS will be the same) - then if you decide to&nbsp; go down the commercial route, get High Integrity Systems to provide a demo for your target.

Regards.