# make LPC2368 webserver **URL:** \ **Category:** Kernel\ **Created:** [January 3, 2008, 6:10pm UTC](https://forums.freertos.org/t/make-lpc2368-webserver/169 "2008-01-03T18:10:11Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\ **Post date:** [January 3, 2008, 6:10pm UTC](https://forums.freertos.org/t/make-lpc2368-webserver/169/1 "2008-01-03T18:10:11Z")
**[anhuly](https://sourceforge.net/u/anhuly/)** wrote on [Thursday, January 03, 2008](https://sourceforge.net/p/freertos/discussion/382005/thread/0b947c95/#e513): I am trying make the LPC2368 webserver projects using Eclipse and as well "make".  I successfully get .hex file in both senerio but once I download it to my LPC2300 board through the serial port using "flashmagic", the LCD does not shown as "PASS" and all the LEDs remained lid. I also try to disable MAM and it remain the same.  I have the lastest GNU Make 3.81, and arm-elf-gcc (GCC) 4.2.2. ---
**Author:** ![rtel](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/rtel/32/31_2.png) [@rtel](https://forums.freertos.org/u/rtel)\ **Post date:** [January 5, 2008, 1:33pm UTC](https://forums.freertos.org/t/make-lpc2368-webserver/169/2 "2008-01-05T13:33:59Z")
**[rtel](https://sourceforge.net/u/rtel/)** wrote on [Saturday, January 05, 2008](https://sourceforge.net/p/freertos/discussion/382005/thread/0b947c95/#e513/6e5a): Do you have a debugger interface? Regards. ---
**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\ **Post date:** [January 7, 2008, 5:45pm UTC](https://forums.freertos.org/t/make-lpc2368-webserver/169/3 "2008-01-07T17:45:55Z")
**[anhuly](https://sourceforge.net/u/anhuly/)** wrote on [Monday, January 07, 2008](https://sourceforge.net/p/freertos/discussion/382005/thread/0b947c95/#e513/ed59): Hi Richard, I also try to run JTAG but it give me the following error message: Info:    openocd.c:93 main(): Open On-Chip Debugger (2007-12-30 17:00 CET) svn:247 Info:    openocd.c:94 main(): $URL: [http://svn.berlios.de/svnroot/repos/openocd/trunk/src/openocd.c](http://svn.berlios.de/svnroot/repos/openocd/trunk/src/openocd.c) $ Info:    jtag.c:1291 jtag\_examine\_chain(): JTAG device found: 0x4f1f0f0f (Manufacturer: 0x787, Part: 0xf1f0, Version: 0x4) Warning: embeddedice.c:175 embeddedice\_build\_reg\_cache(): EmbeddedICE version 7 detected, EmbeddedICE handling might be broken Warning: arm7\_9\_common.c:742 arm7\_9\_assert\_reset(): srst resets test logic, too Warning: arm7\_9\_common.c:941 arm7\_9\_halt(): target was already halted ---
**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\ **Post date:** [January 7, 2008, 8:48pm UTC](https://forums.freertos.org/t/make-lpc2368-webserver/169/4 "2008-01-07T20:48:49Z")
**[davedoors](https://sourceforge.net/u/davedoors/)** wrote on [Monday, January 07, 2008](https://sourceforge.net/p/freertos/discussion/382005/thread/0b947c95/#e513/ed59/09bb): There are some warnings there but I dont think any errors. Looks like the interface is working but when it tried to stop the processor it was already stopped. It should get past that though. ---
**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\ **Post date:** [January 11, 2008, 3:31pm UTC](https://forums.freertos.org/t/make-lpc2368-webserver/169/5 "2008-01-11T15:31:02Z")
**[geah](https://sourceforge.net/u/geah/)** wrote on [Friday, January 11, 2008](https://sourceforge.net/p/freertos/discussion/382005/thread/0b947c95/#e513/0dbe): Hi, I don’t know if this might help. I had similar problems and I have altered 2 things in order to get it to work: 1. Changed the mainCPU\_CLK\_DIV to 4 as well as the configCPU\_CLOCK\_HZ to 48Mhz (main.c). 2. Changed the PINSEL2 = 0x50150105; in (emac.c; row 131). After I did this it worked. I’m using a B version chip. ---
**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\ **Post date:** [January 21, 2008, 2:44am UTC](https://forums.freertos.org/t/make-lpc2368-webserver/169/6 "2008-01-21T02:44:00Z")
**[brucesutherland](https://sourceforge.net/u/brucesutherland/)** wrote on [Monday, January 21, 2008](https://sourceforge.net/p/freertos/discussion/382005/thread/0b947c95/#e513/4d35): Gea, I think possibly you meant mainCPU\_CLK\_DIV = 3. This should produce a clock of 48MHz. The LPC2368 manual states: "Only 0 and odd values (1, 3, 5, …, 255) are supported and can be used when programming the CCLKSEL bits. Warning: Using an even value (2, 4, 6, …, 254) when setting the CCLKSEL bits may result in incorrect operation of the device."