# LPC1768 Red Suite 

**URL:** <https://forums.freertos.org/t/lpc1768-red-suite/3588>\
**Category:** Kernel\
**Created:** [April 4, 2012, 11:46am UTC](https://forums.freertos.org/t/lpc1768-red-suite/3588 "2012-04-04T11:46:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 4, 2012, 11:46am UTC](https://forums.freertos.org/t/lpc1768-red-suite/3588/1 "2012-04-04T11:46:00Z")

</div>

**[alpha86](https://sourceforge.net/u/alpha86/)** wrote on [Wednesday, April 04, 2012](https://sourceforge.net/p/freertos/discussion/382005/thread/9d441b7e/#9495):

Hi I have a RDB1768v2 board and I have followed the freeRTOS example at :  
[http://www.freertos.org/index.html?http://www.freertos.org/LPC1768\_RedSuite.html](http://www.freertos.org/index.html?http://www.freertos.org/LPC1768_RedSuite.html)

I first solved the ethernet issue due to the different component used in the demo for the RDB1768v1.

When I run the program from LPCxpresso, I get this at console, is that fine?:  
set remotetimeout 60000  
set mem inaccessible-by-default off  
mon ondisconnect cont  
set arm force-mode thumb

I will like to know what is the best way to get started. I am thinking of deleting all tasks from the example project mentioned above, and include the CMSIS folder (as with the official RDB1768v2 examples found on CodeRed website). However, I find that the core\_cm3 file in the CodeRed examples(v2.1) are different from the one used in the freeRTOS demo (v1.3). Is it safe to just use the core\_cm3 v2.1?

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 4, 2012, 6:16pm UTC](https://forums.freertos.org/t/lpc1768-red-suite/3588/2 "2012-04-04T18:16:31Z")

</div>

**[edwards3](https://sourceforge.net/u/edwards3/)** wrote on [Wednesday, April 04, 2012](https://sourceforge.net/p/freertos/discussion/382005/thread/9d441b7e/#7efd):

set remotetimeout 60000  
set mem inaccessible-by-default off  
mon ondisconnect cont  
set arm force-mode thumb

These are commands being sent by a script run in the IDE to GDB (the debugger). It is nothing to do with FreeRTOS and nothing to be concerned about as expected behavior.

I recommend always using the latest CMSIS files.

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 9, 2012, 1:39am UTC](https://forums.freertos.org/t/lpc1768-red-suite/3588/3 "2012-04-09T01:39:34Z")

</div>

**[alpha86](https://sourceforge.net/u/alpha86/)** wrote on [Monday, April 09, 2012](https://sourceforge.net/p/freertos/discussion/382005/thread/9d441b7e/#8716):

Thanks edwards3, yup juz realized the gdb commands being sent.

Okay, I’ll just use the latest CMSIS files then. Anyway, how can I know what is freeRTOS doing on the driver/interrupt/clock of the cortex-m3 and is the code written at this low level configuration compliant to CMSIS? I think my question is how can I see these codes and see if they reflect the new CMSIS and if not, I can change them. Is it recommended to touch these codes?