# IAR kickstart with IAR STR750-SK eval board

**URL:** <https://forums.freertos.org/t/iar-kickstart-with-iar-str750-sk-eval-board/1763>\
**Category:** Kernel\
**Created:** [April 1, 2007, 9:31pm UTC](https://forums.freertos.org/t/iar-kickstart-with-iar-str750-sk-eval-board/1763 "2007-04-01T21:31:42Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 1, 2007, 9:31pm UTC](https://forums.freertos.org/t/iar-kickstart-with-iar-str750-sk-eval-board/1763/1 "2007-04-01T21:31:42Z")

</div>

**nobody** wrote on [Sunday, April 01, 2007](https://sourceforge.net/p/freertos/discussion/382005/thread/4ea091e4/#8a74):

I’m using the IAR kickstart kit with the Freertos STR75x\_IAR project. It compiles fine but when I download it reports me the following message. J-Link driver, “There were warnings during download”. The warnings are "Target inconsistency detected at memory address:  
0x200009A8. There’s many of those same messages. It doesn’t look like it downloaded at all.

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 2, 2007, 7:25am UTC](https://forums.freertos.org/t/iar-kickstart-with-iar-str750-sk-eval-board/1763/2 "2007-04-02T07:25:18Z")

</div>

**nobody** wrote on [Monday, April 02, 2007](https://sourceforge.net/p/freertos/discussion/382005/thread/4ea091e4/#8a74/218f):

Go to the project option-\>Debugger category-\>Download tab and ensure that suppress download is not checked and use flash loaders is checked.

Dave.

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 2, 2007, 1:38pm UTC](https://forums.freertos.org/t/iar-kickstart-with-iar-str750-sk-eval-board/1763/3 "2007-04-02T13:38:22Z")

</div>

**nobody** wrote on [Monday, April 02, 2007](https://sourceforge.net/p/freertos/discussion/382005/thread/4ea091e4/#8a74/220f):

Those are the settings I have. I did have a few problems with the debugger, so I went to a project that worked and copied all of the the debugger and J-tag/Jlink settings. It fixed most of the issues except the memory inconsistency warnings. However a few of the sample programs that came with the kickstart kit report the same memory inconsistency warnings sometimes.

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 18, 2007, 8:55pm UTC](https://forums.freertos.org/t/iar-kickstart-with-iar-str750-sk-eval-board/1763/4 "2007-04-18T20:55:10Z")

</div>

**nobody** wrote on [Wednesday, April 18, 2007](https://sourceforge.net/p/freertos/discussion/382005/thread/4ea091e4/#8a74/b3af):

I have the same results.&nbsp; The issue is that the IAR board has different peripheral and memory layout than the ST board.&nbsp; If no one has done a port for this board, I’m planning to do one.&nbsp; It certainly seems straighforward enough since the differences are minimal.

-m
