# IAR Board

**URL:** <https://forums.freertos.org/t/iar-board/1880>\
**Category:** Kernel\
**Created:** [January 21, 2005, 1:06pm UTC](https://forums.freertos.org/t/iar-board/1880 "2005-01-21T13:06:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [January 21, 2005, 1:06pm UTC](https://forums.freertos.org/t/iar-board/1880/1 "2005-01-21T13:06:15Z")

</div>

**nobody** wrote on [Friday, January 21, 2005](https://sourceforge.net/p/freertos/discussion/382005/thread/5bf01e32/#9dd8):

hi everibody,

I’m using the IAR KickStart Card for Philips  
LPC2106, can i use the&nbsp; Freertos?

Thanks

Leo

---

<div class="post-metadata">

**Author:** ![rtel](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/rtel/32/31_2.png) [@rtel](https://forums.freertos.org/u/rtel)\
**Post date:** [January 21, 2005, 1:25pm UTC](https://forums.freertos.org/t/iar-board/1880/2 "2005-01-21T13:25:55Z")

</div>

**[rtel](https://sourceforge.net/u/rtel/)** wrote on [Friday, January 21, 2005](https://sourceforge.net/p/freertos/discussion/382005/thread/5bf01e32/#9dd8/01ff):

Hi,

Did you recently send me an email regarding the KickStart board?&nbsp; If so can you send it again (address from WEB site) as I some how managed to miss place it - thanks.

The FreeRTOS download currently has ports for the LPC2000 series using CrossWords, plain GCC and Keil - but not IAR.&nbsp;&nbsp; However, there is an IAR port for the Atmel SAM7S - which is also has an ARM7 core so is very similar.

Using IAR with the LPC2000 would require setting up a project.&nbsp; This would be a combination:&nbsp; The setup and syntax as per the SAM7 port, with the peripheral configuration as per the LPC2000 ports.

So, having rambled for a while, the quick answer is Yes, but not "straight out of the box".

Regards,  
Richard.