# FreeRTOS+TCP on iMXRT106x

**URL:** <https://forums.freertos.org/t/freertos-tcp-on-imxrt106x/21721>\
**Category:** Libraries\
**Created:** [October 28, 2024, 2:40pm UTC](https://forums.freertos.org/t/freertos-tcp-on-imxrt106x/21721 "2024-10-28T14:40:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![matt0x000c](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/matt0x000c/32/5037_2.png) [@matt0x000c](https://forums.freertos.org/u/matt0x000c)\
**Post date:** [October 28, 2024, 2:40pm UTC](https://forums.freertos.org/t/freertos-tcp-on-imxrt106x/21721/1 "2024-10-28T14:40:11Z")

</div>

Is FreeRTOS+TCP supported on the NXP iMXRT1060? So far, I’ve only come across examples of FreeRTOS + lwIP…

I’m in the process of following [the instructions on adding +TCP](https://www.freertos.org/Documentation/03-Libraries/02-FreeRTOS-plus/02-FreeRTOS-plus-TCP/04-Tutorial/03-Including-in-a-project) to the NXP SDK example freertos\_hello, but is this the right strategy or should I be starting from somewhere else?

I found [this post from 2021](https://forums.freertos.org/t/freertos-tcp-ip-for-nxp-i-mx-examples-demos-docs/11578) by @nickw

---

<div class="post-metadata">

**Author:** ![NikhilKamath](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/nikhilkamath/32/2934_2.png) [@NikhilKamath](https://forums.freertos.org/u/NikhilKamath)\
**Post date:** [October 28, 2024, 3:25pm UTC](https://forums.freertos.org/t/freertos-tcp-on-imxrt106x/21721/2 "2024-10-28T15:25:59Z")

</div>

Hi Matt - welcome to FreeRTOS community.

You can try our Featured Reference Integration repo where we have support for FreeRTOS+TCP: [GitHub - FreeRTOS/iot-reference-nxp-rt1060 at v202403.00-SESIP](https://github.com/FreeRTOS/iot-reference-nxp-rt1060/tree/v202403.00-SESIP). Note, at this point it points to FreeRTOS-Plus-TCP v3.1.0. Hope this helps.

Regards,  
Nikhil

---

<div class="post-metadata">

**Author:** ![matt0x000c](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/matt0x000c/32/5037_2.png) [@matt0x000c](https://forums.freertos.org/u/matt0x000c)\
**Post date:** [October 28, 2024, 5:34pm UTC](https://forums.freertos.org/t/freertos-tcp-on-imxrt106x/21721/3 "2024-10-28T17:34:17Z")

</div>

Hi @NikhilKamath,  
Thank you for sharing that! I will explore the integration.

> Note, at this point it points to FreeRTOS-Plus-TCP v3.1.0.

One question about that, is the FreeRTOS-Plus-TCP version dependent on the FreeRTOS kernel version?  
Thanks!  
Matt

---

<div class="post-metadata">

**Author:** ![archigup](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/archigup/32/1418_2.png) [@archigup](https://forums.freertos.org/u/archigup)\
**Post date:** [October 28, 2024, 9:09pm UTC](https://forums.freertos.org/t/freertos-tcp-on-imxrt106x/21721/4 "2024-10-28T21:09:33Z")

</div>

Hi, FreeRTOS+TCP releases do not depend on specific FreeRTOS kernel releases. As long as your FreeRTOS kernel is new enough, you should be good.