# FreeRTOS+TCP for Microzed

**URL:** <https://forums.freertos.org/t/freertos-tcp-for-microzed/3037>\
**Category:** Kernel\
**Created:** [June 17, 2015, 1:17pm UTC](https://forums.freertos.org/t/freertos-tcp-for-microzed/3037 "2015-06-17T13:17:11Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [June 17, 2015, 1:17pm UTC](https://forums.freertos.org/t/freertos-tcp-for-microzed/3037/1 "2015-06-17T13:17:11Z")

</div>

**[kiyo-2016](https://sourceforge.net/u/kiyo-2016/)** wrote on [Wednesday, June 17, 2015](https://sourceforge.net/p/freertos/discussion/382005/thread/8747b50e/#e17e):

Hello,  
I am developing with FreeRTOS on Microzed, using Vivado 2015.1.  
And I’m interested in FreeRTOS+TCP indeed.  
I would be grateful if you could send me the hardware project of FreeRTOS+TCP for Microzed Xc7z010.  
Regards

---

<div class="post-metadata">

**Author:** ![rtel](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/rtel/32/31_2.png) [@rtel](https://forums.freertos.org/u/rtel)\
**Post date:** [June 17, 2015, 1:26pm UTC](https://forums.freertos.org/t/freertos-tcp-for-microzed/3037/2 "2015-06-17T13:26:20Z")

</div>

**[rtel](https://sourceforge.net/u/rtel/)** wrote on [Wednesday, June 17, 2015](https://sourceforge.net/p/freertos/discussion/382005/thread/8747b50e/#e17e/e5b5):

Did we already send you the project for the ZC702 (the larger Zynq  
evaluation board)? If so that should also run on the MicroZed. As far  
as I know only the GPIO pin used for the LED output needs to be changed.

Nothing outside of the Cortex-A9 core is used, so you should be able to  
use the default/standard hardware definition for your board. If you add  
the hardware definition to the project, then create a BSP for your  
hardware definition (both through the Xilinx SDK tools - those steps are  
not FreeRTOS specific) then you can switch the application project (the  
FreeRTOS+TCP project) to use the new BSP.

Regards.

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [June 19, 2015, 2:15am UTC](https://forums.freertos.org/t/freertos-tcp-for-microzed/3037/3 "2015-06-19T02:15:53Z")

</div>

**[kiyo-2016](https://sourceforge.net/u/kiyo-2016/)** wrote on [Friday, June 19, 2015](https://sourceforge.net/p/freertos/discussion/382005/thread/8747b50e/#7904):

– Did we already send you the project for the ZC702 (the larger Zynq  
– evaluation board)?  
Is that download codes in page of “FreeRTOS+TCP and FreeRTOS+FAT Source Code”?  
If not, please teach me where I could download the project.

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [June 22, 2015, 8:32am UTC](https://forums.freertos.org/t/freertos-tcp-for-microzed/3037/4 "2015-06-22T08:32:36Z")

</div>

**[kiyo-2016](https://sourceforge.net/u/kiyo-2016/)** wrote on [Monday, June 22, 2015](https://sourceforge.net/p/freertos/discussion/382005/thread/8747b50e/#4e76):

Thank you for sending the FreeRTOS+ project for Zynq.  
I cannot build it at the moment, because “uncached\_memory.h” and the relating files are not found. Could you tell me where they are ?

Regards

---

<div class="post-metadata">

**Author:** ![rtel](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/rtel/32/31_2.png) [@rtel](https://forums.freertos.org/u/rtel)\
**Post date:** [June 22, 2015, 10:57am UTC](https://forums.freertos.org/t/freertos-tcp-for-microzed/3037/5 "2015-06-22T10:57:15Z")

</div>

**[rtel](https://sourceforge.net/u/rtel/)** wrote on [Monday, June 22, 2015](https://sourceforge.net/p/freertos/discussion/382005/thread/8747b50e/#3926):

I am just working on the documentation for the Zynq demo now, and the code will be released to the labs site as soon as that is done.

Regards.
