# FreeRTOS on ARM11?

**URL:** <https://forums.freertos.org/t/freertos-on-arm11/1544>\
**Category:** Kernel\
**Created:** [April 27, 2012, 9:50am UTC](https://forums.freertos.org/t/freertos-on-arm11/1544 "2012-04-27T09:50:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [April 27, 2012, 9:50am UTC](https://forums.freertos.org/t/freertos-on-arm11/1544/1 "2012-04-27T09:50:12Z")

</div>

**[trilogik](https://sourceforge.net/u/trilogik/)** wrote on [Friday, April 27, 2012](https://sourceforge.net/p/freertos/discussion/382005/thread/45597430/#12f7):

Hi!

Is there a port available for ARM1176JZFS? I am asking because of a possible diploma thesis where a FreeRTOS should run on a Raspberry Pi ([http://www.raspberrypi.org/](http://www.raspberrypi.org/)). I did not yet find any valuable information on such a possible project.

So, is it possible to run FreeRTOS on this hardware?

Thanks for any single hint.

Best regards,  
Dennis

---

<div class="post-metadata">

**Author:** ![rtel](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/rtel/32/31_2.png) [@rtel](https://forums.freertos.org/u/rtel)\
**Post date:** [April 27, 2012, 11:22am UTC](https://forums.freertos.org/t/freertos-on-arm11/1544/2 "2012-04-27T11:22:55Z")

</div>

**[rtel](https://sourceforge.net/u/rtel/)** wrote on [Friday, April 27, 2012](https://sourceforge.net/p/freertos/discussion/382005/thread/45597430/#95fb):

I’m sure you will find some ARM11 ports around the web, it is a topic that comes up occasionally, but I consider this to be slightly out of the FreeRTOS target market so there are no official demos.

That said, I would be very interested if you were to create a port to the RaspberryPI, and can create a forum in the FreeRTOS Interactive site for you if you do.

Regards.

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [January 5, 2013, 7:55pm UTC](https://forums.freertos.org/t/freertos-on-arm11/1544/3 "2013-01-05T19:55:18Z")

</div>

**anonymous** wrote on [Saturday, January 05, 2013](https://sourceforge.net/p/freertos/discussion/382005/thread/45597430/#c36b):

James Walmsley put together a port here: [https://github.com/jameswalmsley/RaspberryPi-FreeRTOS](https://github.com/jameswalmsley/RaspberryPi-FreeRTOS)

See: [http://interactive.freertos.org/entries/22353267-raspberry-pi-port-almost-ready](http://interactive.freertos.org/entries/22353267-raspberry-pi-port-almost-ready)

I’m working on building a BSP for FreeRTOS’ IO library so we can have full use of all the hardware.&nbsp; I haven’t seen this done yet for the Pi.&nbsp;