# FreeRTOS for AT91SAM7S & GCC - which...

**URL:** <https://forums.freertos.org/t/freertos-for-at91sam7s-gcc-which/2911>\
**Category:** Kernel\
**Created:** [December 11, 2009, 9:16am UTC](https://forums.freertos.org/t/freertos-for-at91sam7s-gcc-which/2911 "2009-12-11T09:16:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [December 11, 2009, 9:16am UTC](https://forums.freertos.org/t/freertos-for-at91sam7s-gcc-which/2911/1 "2009-12-11T09:16:04Z")

</div>

**[toni2tn](https://sourceforge.net/u/toni2tn/)** wrote on [Friday, December 11, 2009](https://sourceforge.net/p/freertos/discussion/382005/thread/8333663b/#9c1d):

Please, can someone explain?:  
In the ports directory there’s AT91SAM7S (GCC), but the files contained are for SAM7X.

I have a SAM7S128 and GCC. Which port/demo should I use?

Thank you.

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [December 11, 2009, 9:21am UTC](https://forums.freertos.org/t/freertos-for-at91sam7s-gcc-which/2911/2 "2009-12-11T09:21:53Z")

</div>

**[davedoors](https://sourceforge.net/u/davedoors/)** wrote on [Friday, December 11, 2009](https://sourceforge.net/p/freertos/discussion/382005/thread/8333663b/#5f97):

From the kernel port perspective the two are the same, so you can use the files in that directory.