# AVR Studio32 and Stateviewer plug-in

**URL:** <https://forums.freertos.org/t/avr-studio32-and-stateviewer-plug-in/2060>\
**Category:** Kernel\
**Created:** [September 14, 2009, 9:53pm UTC](https://forums.freertos.org/t/avr-studio32-and-stateviewer-plug-in/2060 "2009-09-14T21:53:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [September 14, 2009, 9:53pm UTC](https://forums.freertos.org/t/avr-studio32-and-stateviewer-plug-in/2060/1 "2009-09-14T21:53:04Z")

</div>

**[destremps](https://sourceforge.net/u/destremps/)** wrote on [Monday, September 14, 2009](https://sourceforge.net/p/freertos/discussion/382005/thread/5d079fbb/#6b7c):

Hello all,

Has anyone sucessfully operated the FreeRTOS Stateviewer plug-in in the Eclipse environment? I’ve been struggling w/o success for several days.

Would like to know which version of Studio32, GNU toolchain, eclipse etc were needed. Any other tips or tricks needed.

I’ve been trying with FreeRTOS version 5.3.

USE\_TRACE\_FACILITY = 1

configUSE\_APPLICATION\_TASK\_TAG = 1.

At this point I only trying to see the tasks. I get the task ‘tab’ opened in the eclipse environment. Column headers are all there. But the task table is not populated. It’s empty. Where the code is stopped definately many tasks have been created and exist.

Any guidance appreciated.  
Regards,

---

<div class="post-metadata">

**Author:** ![system](https://d2v6vdsk2p900z.cloudfront.net/original/1X/7fc8fdb729c645aab5b20282bbe34e57cb407be6.jpeg) [@system](https://forums.freertos.org/u/system)\
**Post date:** [September 14, 2009, 10:28pm UTC](https://forums.freertos.org/t/avr-studio32-and-stateviewer-plug-in/2060/2 "2009-09-14T22:28:05Z")

</div>

**[destremps](https://sourceforge.net/u/destremps/)** wrote on [Monday, September 14, 2009](https://sourceforge.net/p/freertos/discussion/382005/thread/5d079fbb/#b853):

I guess I should say that the project revolves around an Atmel AVR32 UC3A0512. And the development environment is their Studio32. I kind of did in the topic title.