# Atmel SAME70 +TCP

**URL:** <https://forums.freertos.org/t/atmel-same70-tcp/10296>\
**Category:** Libraries\
**Created:** [July 17, 2020, 10:04am UTC](https://forums.freertos.org/t/atmel-same70-tcp/10296 "2020-07-17T10:04:35Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bikeprincess](https://d3iykfbgfh8zhg.cloudfront.net/user_avatar/forums.freertos.org/bikeprincess/32/683_2.png) [@Bikeprincess](https://forums.freertos.org/u/Bikeprincess)\
**Post date:** [July 17, 2020, 10:04am UTC](https://forums.freertos.org/t/atmel-same70-tcp/10296/1 "2020-07-17T10:04:36Z")

</div>

Hello,

I want to use FreeRTOS with TCP. I have dev. board SAME70XPLAINED.  
After read few topic I can’t run basic and don’t see anything in wireshark.

I’m trying copy example project and drivers ([Topic](https://forums.freertos.org/t/freertos-tcp-on-same70-with-asf4-atmel-start-mac-drivers/7460/16) and [Topic](https://forums.freertos.org/t/freertos-tcp-on-same70/9615) ) into to my project, but without success. Can tell me, what I do wrong?

I attach my project =\> [same70rtos.zip](https://forums.freertos.org/uploads/short-url/6AUCprYWV2Q978BmKcm1pA1susG.zip) (3.8 MB)  
I’m using FreeRTOS v 10.3.1 with ASF3

Thanks for hepl 🙂

PS: when I use example project from atmel with lwIP it’s functionaly and I see communication in wireshark.